ѡH6(( y{H6L|_'w ((0 L|_'w Xhx6  @ urn indicates the implementation (provider) does not implement this property. "Not Available" indicates that the implementation (provider) is capable of returning a value for this property, but not ever for this particular piece of hardware/software or the property is intentionally not used because it adds no meaningful information (as in the case of a property that is intended to add additional info to another property). "No Additional Information" indicates that the element is functioning normally as indicated by PrimaryStatus = "OK". "Stressed" indicates that the element is functioning, but needs attention. Examples of "Stressed" states are overload, overheated, and so on. "Predictive Failure" indicates that an element is functioning normally but a failure is predicted in the near future. "Non-Recoverable Error " indicates that this element is in an error condition that requires human intervention. "Supporting Entity in Error" indicates that this element might be "OK" but that another element, on which it is dependent, is in error. An example is a network service or endpoint that cannot function due to lower-layer networking problems.ValueMap!!!!!!!!012345..0x8000..Values!!!""+"G"V"Not AvailableNo Additional InformationStressedPredictive FailureNon-Recoverable ErrorSupporting Entity in ErrorDMTF ReservedVendor ReservedElementName@  #""""stringDescriptionA user-friendly name for the object. This property allows each instance to define a user-friendly name in addition to its key properties, identity data, and description information. Note that the Name property of ManagedSystemElement is also defined as a user-friendly name. But, it is often subclassed to be a Key. It is not reasonable that the same property can convey both identity and a user-friendly name, without inconsistencies. Where Name exists and is not a Key (such as for instances of LogicalDevice), the same information can be present in both the Name and ElementName properties. Note that if there is an associated instance of CIM_EnabledLogicalElementCapabilities, restrictions on this properties may exist as defined in ElementNameMask and MaxElementNameLen properties defined in that class.EnabledDefault@6C #A&# I&"V&&" 'Q'" Y'uint16DescriptionAn enumerated value indicating an administrator's default or startup configuration for the Enabled State of an element. By default, the element is "Enabled" (value=2).ValueMap-'0'3'6'9'<'?'C'235679..32768..65535Values}''''''''EnabledDisabledNot ApplicableEnabled but OfflineNo DefaultQuiesceDMTF ReservedVendor ReservedEnabledState@.8 #>(F("S(,-" 6--" -uint16DescriptionEnabledState is an integer enumeration that indicates the enabled and disabled states of an element. It can also indicate the transitions between these requested states. For example, shutting down (value=4) and starting (value=10) are transient states between enabled and disabled. The following text briefly summarizes the various enabled and disabled states: Enabled (2) indicates that the element is or could be executing commands, will process any queued commands, and queues new requests. Disabled (3) indicates that the element will not execute commands and will drop any new requests. Shutting Down (4) indicates that the element is in the process of going to a Disabled state. Not Applicable (5) indicates the element does not support being enabled or disabled. Enabled but Offline (6) indicates that the element might be completing commands, and will drop any new requests. Test (7) indicates that the element is in a test state. Deferred (8) indicates that the element might be completing commands, but will queue any new requests. Quiesce (9) indicates that the element is enabled but in a restricted mode. Starting (10) 8$   ) ![ #RequestStateChange AV4722ROOT\HPQ  *__PARAMETERSabstractRequestedStateuint16 :IN :a The state requested for the element. This information will be placed into the RequestedState property of the instance if the return code of the RequestStateChange method is 0 ('Completed with No Error'), or 4096 (0x1000) ('Job Started'). Refer to the description of the EnabledState and RequestedState properties for the detailed explanations of the RequestedState values.Description) :a  y|23467891011..32768..65535ValueMap6 :a  I &/9DMSZckrEnabledDisabledShut DownOfflineTestDeferQuiesceRebootResetDMTF ReservedVendor ReservedValuesC :a  I CIM_EnabledLogicalElement.RequestedStateModelCorrespondenceP :a  I  ID] a  I  uint16eTimeoutPerioddatetimee (INe (Q A timeout period that specifies the maximum amount of time that the client expects the transition to the new state to take. The interval format must be used to specify the TimeoutPeriod. A value of 0 or a null parameter indcode of 3 shall indicate that the state transition cannot complete within the interval specified by the TimeoutPeriod parameter. A return code of 4096 (0x1000) shall indicate the state change was successfully initiated, a ConcreteJob has been created, and its reference returned in the output parameter Job. Any other return code indicates an error condition.ValueMap),/258;>BHNTZg0123456..40964097409840994100..3276732768..65535Values&.AIXCompleted with No ErrorNot SupportedUnknown or Unspecified ErrorCannot complete within Timeout PeriodFailedInvalid ParameterIn UseDMTF ReservedMethod Parameters Checked - Job StartedInvalid State TransitionUse of Timeout Parameter Not SupportedBusyMethod ReservedVendor SpecificSetPowerStateAV4722ROOT\HPQ q  *U__PARAMETERSabstractPowerStateuint32 6IN 6] The Desired state for the COmputerSystem.Description) 6] !$'*-0312345678ValueMap6 6] 6 Full PowerPower Save - Low Power ModePower Save - StandbyPower Save - OtherPower CyclePower OffHibernateSoft OffValuesC 6] 6 ( IDP ] 6 ( uint32eTimedatetimee INe , Time indicates when the power state should be set, either as a regular date-time value or as an interval value (where the interval begins when the method invocation is received.Descriptione) , ZIDe6 , ZQdatetime __nAV4722ROOT\HPQ & *k__PARAMETERSabstractReturnValueuint32 ^uint32out ^f __:"GDescriptionSets the power state of the computer. The use of this method has been deprecated. Instead, use the SetPowerState method in the associated PowerManagementService class.SendTestIndicationSAV4722ROOT\HPQ  *^__PARAMETERSabstractTestIndicationIDuint32 <IN <c Internal identifier of the test event to generate 101 - Informational Test Event 102 - Warning Test Event 103 - Critical Test EventDescription) <c ID6 c Zuint32 __nAV4722ROOT\HPQ & *k__PARAMETERSabstractReturnValueuint32 ^uint32out ^f +zc+WBEMDATA   AV4722ROOT\HPQCIM_ComputerSystemCIM_System CIM_EnabledLogicalElementCIM_LogicalElementCIM_ManagedSystemElementCIM_ManagedElement) +Nce x %g"t"%%''..U5n566X7l77799{??@"@BBxC~CYDeD.F?FRR_```aacdffphhiik-knnxy_{f{}}~<Q~:H.^UU  HP_ComputerSystemDescriptionCIM_ComputerSystem with additional HP specific properties. This class abstracts the Computer SystemAbstractVersion1.3.0AvailableRequestedStates`<8 #"" " &uint16DescriptionAvailableRequestedStates indicates the possible values for the RequestedState parameter of the method RequestStateChange, used to initiate a state change. The values listed shall be a subset of the values contained in the RequestedStatesSupported property of the associated instance of CIM_EnabledLogicalElementCapabilities where the values selected are a function of the current state of the CIM_EnabledLogicalElement. This property may be non-null if an implementation is able to advertise the set of possible values as a function of the current state. This property shall be null if an implementation is unable to determine the set of possible values as a function of the current state.ValueMap   23467891011..Values R[epyEnabledDisabledShut DownOfflineTestDeferQuiesceRebootResetDMTF ReservedCaption@ #"stringDescriptionThe Caption property is a short textual description (one- line string) of the object.CommunicationStatus@ &8 #" " " uint16DescriptionCommunicationStatus indicates the ability of the instrumentation to communicate with the underlying ManagedElement. CommunicationStatus consists of one of the following values: Unknown, None, Communication OK, Lost Communication, or No Contact. A Null return indicates the implementation (provider) does not implement this property. "Unknown" indicates the implementation is in general capable of returning this property, but is unable to do so at this time. "Not Available" indicates that the implementation (provider) is capable of returning a value for this property, but not ever for this particular piece of hardware/software or the property is intentionally not used because it adds no meaningful information (as in the case of a property that is intended to add additional info to another property). "Communication OK " indicates communication is established with the element, but does not convey any quality of service. "No Contact" indicates that the monitoring system has knowledge of this element, but has never been able to establish communications with it. "Lost Communication" indicates that the Managed Element is known to exist and has been contacted successfully in the past, but is currently unreachable.ValueMap 01234..0x8000..Values   % 9 E T UnknownNot AvailableCommunication OKLost CommunicationNo ContactDMTF ReservedVendor ReservedCreationClassName@B) # 3 " stringDescriptionCreationClassName indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this class and its subclasses to be uniquely identified.Dedic __6""R# \## ## DescriptionMethod to cause the provider to send a test indication. Returns 0 if the request to send the indication was successful. Returns 1 if method not supported. Returns 2 if request to send indication failed. Returns 3 if busy processing previously requested indication. Returns 4 if the TestIndicationID is NULL or not valid.ValueMapt#w#z#}##01234Values#####OKNot SupportedFailedBusyInvalid ParameterImplementedsy processing previously requested indication. Returns 4 if the TestIndicationID is NULL or not valid.ValueMapt#w#z#}##01234Values#####OKNot SupportedFailedBusyInvalid ParameterImplementedues: Unknown, OK, Degraded or Error. "Unknown" indicates the implementation is in general capable of returning this property, but is unable to do so at this time. "OK" indicates the ManagedElement is functioning normally. "Degraded" indicates the ManagedElement is functioning below normal. "Error" indicates the ManagedElement is in an Error condition.ValueMapSnVnYn\n_ncn0123..0x8000..ValuesnnnnnnUnknownOKDegradedErrorDMTF ReservedVendor ReservedRequestedState@48 #%o-o":ow" wx" #xuint16DescriptionRequestedState is an integer enumeration that indicates the last requested or desired state for the element, irrespective of the mechanism through which it was requested. The actual state of the element is represented by EnabledState. This property is provided to compare the last requested and current enabled or disabled states. Note that when EnabledState is set to 5 ("Not Applicable"), then this property has no meaning. Refer to the EnabledState property description for explanations of the values in the RequestedState enumeration. "Unknown" (0) indicates the last requested state for the element is unknown. Note that the value "No Change" (5) has been deprecated in lieu of indicating the last requested state is "Unknown" (0). If the last requested or desired state is unknown, RequestedState should have the value "Unknown" (0), but may have the value "No Change" (5).Offline (6) indicates that the element has been requested to transition to the Enabled but Offline EnabledState. It should be noted that there are two new values in RequestedState that build on the statuses of EnabledState. These are "Reboot" (10) and "Reset" (11). Reboot refers to doing a "Shut Down" and then moving to an "Enabled" state. Reset indicates that the element is first "Disabled" and then "Enabled". The distinction between requesting "Shut Down" and "Disabled" should also be noted. Shut Down requests an orderly transition to the Disabled state, and might involve removing power, to completely erase any existing state. The Disabled state requests an immediate disabling of the element, such that it will not execute or accept any commands or processing requests. This property is set as the result of a method invocation (such as Start or StopService on CIM_Service), or can be overridden and defined as WRITEable in a subclass. The method approach is considered superior to a WRITEable property, because it allows an explicit invocation of the operation and the return of a result code. If knowledge of the last RequestedState is not supported for the EnabledLogicalElement, the property shall be NULL or have the value 12 "Not Applicable".ValueMapwwwwwwwwwwxx x x023456789101112..32768..65535Values_xhxqx{xxxxxxxxxxxUnknownEnabledDisabledShut DownNo ChangeOfflineTestDeferredQuiesceRebootResetNot ApplicableDMTF ReservedVendor ReservedResetCapability@fE #Vy^y"kyz" zz" z{" .{uint16DescriptionIf enabled (value = 4), the ComputerSystem can be reset via hardware (e.g. the power and reset buttons). If disabled (value = 3), hardware reset is not allowed. In addition to Enabled and Disabled, other Values for the property are also defined - "Not Implemented" (5), "Other" (1) and "Unknown" (2).ValueMapzzzzz12345Valueszzz{ {OtherUnknownDisabledEnabledNot ImplementedMappingStrings6{MIF.DMTF|System Hardware Security|001.4Roles`R) #{# {"{stringDescriptionAn array (bag) of strings that specifies the administrator -defined roles this System plays in the managed environment. Examples might be 'Building 8 print server' or 'Boise user directories'. A single system may perform multiple roles. Note that the instrumentation view of t" cuint16DescriptionAn enumerated array describing the power management capabilities of the ComputerSystem. The use of this property has been deprecated. Instead, the Power Capabilites property in an associated PowerManagement Capabilities class should be used.ValueMapbbbbbbbb01234567Valuesbccc'cQcgccUnknownNot SupportedDisabledEnabledPower Saving Modes Entered AutomaticallyPower State SettablePower Cycling SupportedTimed Power On SupportedMappingStringscMIF.DMTF|System Power Controls|001.2PrimaryOwnerContact@N6 #1d# 9d"Fdd" dstringDescriptionA string that provides information on how the primary system owner can be reached (e.g. phone number, email address, ...).MappingStringsdMIF.DMTF|General Information|001.3PrimaryOwnerName@J6 #Te# \e"iee" estringDescriptionThe name of the primary system owner of the system.MappingStringseMIF.DMTF|General Information|001.4PrimaryOwnerPager@ l6 #1f# 9f"Ffuf" fstringDescriptionThe pager number of the primary system owner.MappingStringsfMIF.DMTF|General Information|001.9PrimaryStatus@ ,8 #gg"gi" ij" juint16DescriptionPrimaryStatus provides a high level status value, intended to align with Red-Yellow-Green type representation of status. It should be used in conjunction with DetailedStatus to provide high level and detailed health status of the ManagedElement and its subcomponents. PrimaryStatus consists of one of the following values: Unknown, OK, Degraded or Error. "Unknown" indicates the implementation is in general capable of returning this property, but is unable to do so at this time. "OK" indicates the ManagedElement is functioning normally. "Degraded" indicates the ManagedElement is functioning below normal. "Error" indicates the ManagedElement is in an Error condition.ValueMapiiiiii0123..0x8000..Values$j-j1j;jBjQjUnknownOKDegradedErrorDMTF ReservedVendor ReservedRequestedState@48 #jj"j/s" 9ss" suint16DescriptionRequestedState is an integer enumeration that indicates the last requested or desired state for the element, irrespective of the mechanism through which it was requested. The actual state of the element is represented by EnabledState. This property is provided to compare the last requested and current enabled or disabled states. Note that when EnabledState is set to 5 ("Not Applicable"), then this property has no meaning. Refer to the EnabledState property description for explanations of the values in the RequestedState enumeration. "Unknown" (0) indicates the last requested state for the element is unknown. Note that the value "No Change" (5) has been deprecated in lieu of indicating the last requested state is "Unknown" (0). If the last requested or desired state is unknown, RequestedState should have the value "Unknown" (0), but may have the value "No Change" (5).Offline (6) indicates that the element has been requested to transition to the Enabled but Offline EnabledState. It should be noted that there are two new values in RequestedState that build on the statuses of EnabledState. These are "Reboot" (10) and "Reset" (11). Reboot refers to doing a "Shut Down" and then moving to an "Enabled" state. Reset indicates that the element is first "Disabled" and then "Enabled". The distinction between requesting "Shut Down" and "Disabled" should also be noted. Shut Down requests an orderly transition to the Disabled state, and might involve removing power, to completely erase any existing state. The Disabled state requests an immediate disabling of the element, such that it will not execute or accept any commands or processing requests. This property is set as the result of a meindicates that the element is in the process of going to an Enabled state. New requests are queued.ValueMap n-q-t-w-z-}--------01234567891011..3276732768..65535Values ---. ..+.@.I.S.\.f.u.UnknownOtherEnabledDisabledShutting DownNot ApplicableEnabled but OfflineIn TestDeferredQuiesceStartingDMTF ReservedVendor ReservedHealthState@ $8 #..".A4" K44" 4uint16DescriptionIndicates the current health of the element. This attribute expresses the health of this element but not necessarily that of its subcomponents. The possible values are 0 to 30, where 5 means the element is entirely healthy and 30 means the element is completely non-functional. The following continuum is defined: "Non-recoverable Error" (30) - The element has completely failed, and recovery is not possible. All functionality provided by this element has been lost. "Critical Failure" (25) - The element is non-functional and recovery might not be possible. "Major Failure" (20) - The element is failing. It is possible that some or all of the functionality of this component is degraded or not working. "Minor Failure" (15) - All functionality is available but some might be degraded. "Degraded/Warning" (10) - The element is in working order and all functionality is provided. However, the element is not working to the best of its abilities. For example, the element might not be operating at optimal performance or it might be reporting recoverable errors. "OK" (5) - The element is fully functional and is operating within normal operational parameters and without error. "Unknown" (0) - The implementation cannot report on HealthState at this time. DMTF has reserved the unused portion of the continuum for additional HealthStates in the future.ValueMap s4v4y4}444444051015202530..32768..65535Values 44444 5555D5UnknownOKDegraded/WarningMinor failureMajor failureCritical failureNon-recoverable errorDMTF ReservedVendor SpecificIdentifyingDescriptions`Z #55"5stringDescriptionAn array of free-form strings providing explanations and details behind the entries in the OtherIdentifying Info array. Note, each entry of this array is related to the entry in OtherIdentifyingInfo that is located at the same index.IdentifyingNumber(+ 6667 (7stringDescriptionThe UUID of the systemModelCorrespondence07CIM_ComputerSystemPackage.PlatformGUIDIncludedInSolution ) 777booleanDescriptionIdentify if the system is part of Blade System Matrix SolutionInstallDatee@+ #48>8"K88" 8datetimeDescriptionA datetime value that indicates when the object was installed. Lack of a value does not indicate that the object is not installed.MappingStrings8MIF.DMTF|ComponentID|001.5InstanceID@ #;9C9"P9stringDescriptionInstanceID is an optional property that may be used to opaquely and uniquely identify an instance of this class within the scope of the instantiating Namespace. Various subclasses of this class may override this property to make it required, or a key. Such subclasses may also modify the preferred algorithms for ensuring uniqueness that are defined below. To ensure uniqueness within the NameSpace, the value of InstanceID should be constructed using the following "preferred" algorithm: : Where and are separated by a colon (:), and where must include a copyrighted, trademarked, or otherwise unique name that is owned by the business entity that is creating or defining the InstanceID or that is a registered ID assigned to the business entity by a recognized global authority. (This requirement is similar to the _f the managed node, as returned by the gethostname() system call.NameFormat@F+ #AB"BB" BStringDescriptionThe name format of the Name property as per the table of Standard Formats for Durable Names in the SMI-S specification. This may be set to the string 'DNSName'.ValueMapCC CCCC!C&C,C1C6C;CBCGCPCOtherIPDialHIDNWAHWAX25ISDNIPXDCCICDE.164SNAOID/OSIDNSNameOperatingStatus@ *8 #CC"C4N" >NN" Nuint16DescriptionOperatingStatus provides a current status value for the operational condition of the element and can be used for providing more detail with respect to the value of EnabledState. It can also provide the transitional states when an element is transitioning from one state to another, such as when an element is transitioning between EnabledState and RequestedState, as well as other transitional conditions. OperatingStatus consists of one of the following values: Unknown, Not Available, In Service, Starting, Stopping, Stopped, Aborted, Dormant, Completed, Migrating, Emmigrating, Immigrating, Snapshotting. Shutting Down, In Test A Null return indicates the implementation (provider) does not implement this property. "Unknown" indicates the implementation is in general capable of returning this property, but is unable to do so at this time. "None" indicates that the implementation (provider) is capable of returning a value for this property, but not ever for this particular piece of hardware/software or the property is intentionally not used because it adds no meaningful information (as in the case of a property that is intended to add additional info to another property). "Servicing" describes an element being configured, maintained, cleaned, or otherwise administered. "Starting" describes an element being initialized. "Stopping" describes an element being brought to an orderly stop. "Stopped" and "Aborted" are similar, although the former implies a clean and orderly stop, while the latter implies an abrupt stop where the state and configuration of the element might need to be updated. "Dormant" indicates that the element is inactive or quiesced. "Completed" indicates that the element has completed its operation. This value should be combined with either OK, Error, or Degraded in the PrimaryStatus so that a client can tell if the complete operation Completed with OK (passed), Completed with Error (failed), or Completed with Degraded (the operation finished, but it did not complete OK or did not report an error). "Migrating" element is being moved between host elements. "Immigrating" element is being moved to new host element. "Emigrating" element is being moved away from host element. "Shutting Down" describes an element being brought to an abrupt stop. "In Test" element is performing test functions. "Transitioning" describes an element that is between states, that is, it is not fully available in either its previous state or its next state. This value should be used if other values indicating a transition to a specific state are not applicable. "In Service" describes an element that is in service and operational.ValueMapNNNNNNNNNNNNNNNNNNN012345678910111213141516..0x8000..Values.O7OFOQO[OeOnOwOOOOOOOOOOOOUnknownNot AvailableServicingStartingStoppingStoppedAbortedDormantCompletedMigratingEmigratingImmigratingSnapshottingShutting DownIn TestTransitioningIn ServiceDMTF ReservedVendor ReservedOperationalStatus`8 #iPqP"~PZ" Z[" [uint16DescriptionIndicates the current statuses of the element. Various operational statuses are defined. Many of the enumeration's values are self-explanatory. However, a few are not and are described here in more detail. "Stressed" indicates that the element is fement might need to be updated. "Dormant" indicates that the element is inactive or quiesced. "Completed" indicates that the element has completed its operation. This value should be combined with either OK, Error, or Degraded in the PrimaryStatus so that a client can tell if the complete operation Completed with OK (passed), Completed with Error (failed), or Completed with Degraded (the operation finished, but it did not complete OK or did not report an error). "Migrating" element is being moved between host elements. "Immigrating" element is being moved to new host element. "Emigrating" element is being moved away from host element. "Shutting Down" describes an element being brought to an abrupt stop. "In Test" element is performing test functions. "Transitioning" describes an element that is between states, that is, it is not fully available in either its previous state or its next state. This value should be used if other values indicating a transition to a specific state are not applicable. "In Service" describes an element that is in service and operational.ValueMapcQfQiQlQoQrQuQxQ{Q~QQQQQQQQQQ012345678910111213141516..0x8000..ValuesR RR&R0R:RCRLRUR`RkRwRRRRRRRRUnknownNot AvailableServicingStartingStoppingStoppedAbortedDormantCompletedMigratingEmigratingImmigratingSnapshottingShutting DownIn TestTransitioningIn ServiceDMTF ReservedVendor ReservedOperationalStatus`8 #>SFS"SS]" ]^" ^uint16DescriptionIndicates the current statuses of the element. Various operational statuses are defined. Many of the enumeration's values are self-explanatory. However, a few are not and are described here in more detail. "Stressed" indicates that the element is functioning, but needs attention. Examples of "Stressed" states are overload, overheated, and so on. "Predictive Failure" indicates that an element is functioning nominally but predicting a failure in the near future. "In Service" describes an element being configured, maintained, cleaned, or otherwise administered. "No Contact" indicates that the monitoring system has knowledge of this element, but has never been able to establish communications with it. "Lost Communication" indicates that the ManagedSystem Element is known to exist and has been contacted successfully in the past, but is currently unreachable. "Stopped" and "Aborted" are similar, although the former implies a clean and orderly stop, while the latter implies an abrupt stop where the state and configuration of the element might need to be updated. "Dormant" indicates that the element is inactive or quiesced. "Supporting Entity in Error" indicates that this element might be "OK" but that another element, on which it is dependent, is in error. An example is a network service or endpoint that cannot function due to lower-layer networking problems. "Completed" indicates that the element has completed its operation. This value should be combined with either OK, Error, or Degraded so that a client can tell if the complete operation Completed with OK (passed), Completed with Error (failed), or Completed with Degraded (the operation finished, but it did not complete OK or did not report an error). "Power Mode" indicates that the element has additional power model information contained in the Associated PowerManagementService association. "Relocating" indicates the element is being relocated. OperationalStatus replaces the Status property on ManagedSystemElement to provide a consistent approach to enumerations, to address implementation needs for an array property, and to provide a migration path from today's environment to the future. This change was not made earlier because it required the deprecated qualifier. Due to the widespread use of the existing Status property in management applications, it is strongly recommended that providers or instrumentation provide bo00S@02@S\VPS\22256\Device\PcwDrv00S@02@S\VPS\22256\Device\PcwDrvindication failed. Returns 3 if busy processing previously requested indication. Returns 4 if the TestIndicationID is NULL or not valid.ValueMapi#l#o#r#u#01234Values#####OKNot SupportedFailedBusyInvalid Parameter$HP_ComputerSystemCIM_ComputerSystemCIM_System CIM_EnabledLogicalElementCIM_LogicalElementCIM_ManagedSystemElementCIM_ManagedElement6# Slu+|+@B U CS!!%%'&'--445546H66677W>a>>>@@AAAAYCjCP#P%]A]]^_'_a/accdeeeffbjrjttvvLycy)z=z{{{{N|\|||+B  2HP_WinComputerSystemDescriptionHewlett Packard Windows based Computer System.HPWinComputerSystemProvversion1.0.0AvailableRequestedStates`<8 #"" " uint16DescriptionAvailableRequestedStates indicates the possible values for the RequestedState parameter of the method RequestStateChange, used to initiate a state change. The values listed shall be a subset of the values contained in the RequestedStatesSupported property of the associated instance of CIM_EnabledLogicalElementCapabilities where the values selected are a function of the current state of the CIM_EnabledLogicalElement. This property may be non-null if an implementation is able to advertise the set of possible values as a function of the current state. This property shall be null if an implementation is unable to determine the set of possible values as a function of the current state.ValueMap 23467891011..Values /8BMV\clt{EnabledDisabledShut DownOfflineTestDeferQuiesceRebootResetDMTF ReservedCaption@ #"stringDescriptionThe Caption property is a short textual description (one- line string) of the object.CommunicationStatus@ &8 #"i " s " uint16DescriptionCommunicationStatus indicates the ability of the instrumentation to communicate with the underlying ManagedElement. CommunicationStatus consists of one of the following values: Unknown, None, Communication OK, Lost Communication, or No Contact. A Null return indicates the implementation (provider) does not implement this property. "Unknown" indicates the implementation is in general capable of returning this property, but is unable to do so at this time. "Not Available" indicates that the implementation (provider) is capable of returning a value for this property, but not ever for this particular piece of hardware/software or the property is intentionally not used because it adds no meaningful information (as in the case of a property that is intended to add additional info to another property). "Communication OK " indicates communication is established with the element, but does not convey any quality of service. "No Contact" indicates that the monitoring system has knowledge of this element, but has never been able to establish communications with it. "Lost Communication" indicates that the Managed Element is known to exist and has been contacted successfully in the past, but is currently unreachable.ValueMap 01234..0x8000..Values   " 1 UnknownNot AvailableCommunication OKLost CommunicationNo ContactDMTF ReservedVendor ReservedCreationClassName@B) # 3 " stringDescriptionCreationClassName indicates the name of the class or the subclass used in the creation of an i6 ( uint32eTimedatetimee INe , Time indicates when the power state should be set, either as a regular date-time value or as an interval value (where the interval begins when the method invocation is received.Descriptione) , ZIDe6 , ZQdatetime __nAV4722ROOT\HPQ & *k__PARAMETERSabstractReturnValueuint32 ^uint32out ^f __:"GDescriptionSets the power state of the computer. The use of this method has been deprecated. Instead, use the SetPowerState method in the associated PowerManagementService class.SendTestIndicationSAV4722ROOT\HPQ  *^__PARAMETERSabstractTestIndicationIDuint32 <IN <c Internal identifier of the test event to generate 101 - Informational Test Event 102 - Warning Test Event 103 - Critical Test EventDescription) <c ID6 c Zuint32 __nAV4722ROOT\HPQ & *k__PARAMETERSabstractReturnValueuint32 ^uint32out ^f __+!"G# Q#x# #DescriptionMethod to cause the provider to send a test indication. Returns 0 if the request to send the indication was successful. Returns 1 if method not supported. Returns 2 if request to send indication failed. Returns 3 if busy processing previously requested indication. Returns 4 if the TestIndicationID is NULL or not valid.ValueMapi#l#o#r#u#01234Values#####OKNot SupportedFailedBusyInvalid Parameter$HP_ComputerSystemCIM_ComputerSystemCIM_System CIM_EnabledLogicalElementCIM_LogicalElementCIM_ManagedSystemElementCIM_ManagedElement6# Slu+|+@B U CS!!%%'&'--445546H66677W>a>>>@@AAAAYCjCP#P%]A]]^_'_a/accdeeeffbjrjttvvLycy)z=z{{{{N|\|||+B  2HP_WinComputerSystemDescriptionHewlett Packard Windows based Computer System.HPWinComputerSystemProvversion1.0.0AvailableRequestedStates`<8 #"" " uint16DescriptionAvailableRequestedStates indicates the possible values for the RequestedState parameter of the method RequestStateChange, used to init6 Q Udatetime __|AV4722ROOT\HPQ 4  *@__PARAMETERSabstractfJobreff /OUTf /S May contain a reference to the ConcreteJob created to track the state transition initiated by the method invocation.Descriptionf) /S IDf6 S <ref:CIM_ConcreteJobReturnValueuint32 uint32out  __+"" u" }DescriptionRequests that the state of the element be changed to the value specified in the RequestedState parameter. When the requested state change takes place, the EnabledState and RequestedState of the element will be the same. Invoking the RequestStateChange method multiple times could result in earlier requests being overwritten or lost. A return code of 0 shall indicate the state change was successfully initiated. A return code of 3 shall indicate that the state transition cannot complete within the interval specified by the TimeoutPeriod parameter. A return code of 4096 (0x1000) shall indicate the state change was successfully initiated, a ConcreteJob has been created, and its reference returned in the output parameter Job. Any other return code indicates an error condition.ValueMap),/258;>BHNTZg0123456..40964097409840994100..3276732768..65535Values&.AIXCompleted with No ErrorNot SupportedUnknown or Unspecified ErrorCannot complete within Timeout PeriodFailedInvalid ParameterIn UseDMTF ReservedMethod Parameters Checked - Job StartedInvalid State TransitionUse of Timeout Parameter Not SupportedBusyMethod ReservedVendor SpecificSetPowerStateAV4722ROOT\HPQ q  *U__PARAMETERSabstractPowerStateuint32 6IN 6] The Desired state for the COmputerSystem.Description) 6] !$'*-0312345678ValueMap6 6] 6 Full PowerPower Save - Low Power ModePower Save - StandbyPower Save - OtherPower CyclePower OffHibernateSoft OffValuesC 6] 6 ( IDP ]  $   )![ #RequestStateChange AV4722ROOT\HPQ  *__PARAMETERSabstractRequestedStateuint16 :IN :a The state requested for the element. This information will be placed into the RequestedState property of the instance if the return code of the RequestStateChange method is 0 ('Completed with No Error'), or 4096 (0x1000) ('Job Started'). Refer to the description of the EnabledState and RequestedState properties for the detailed explanations of the RequestedState values.Description) :a  y|23467891011..32768..65535ValueMap6 :a  I &/9DMSZckrEnabledDisabledShut DownOfflineTestDeferQuiesceRebootResetDMTF ReservedVendor ReservedValuesC :a  I CIM_EnabledLogicalElement.RequestedStateModelCorrespondenceP :a  I  ID] a  I  uint16eTimeoutPerioddatetimee (INe (Q A timeout period that specifies the maximum amount of time that the client expects the transition to the new state to take. The interval format must be used to specify the TimeoutPeriod. A value of 0 or a null parameter indicates that the client has no time requirements for the transition. If this property does not contain 0 or null and the implementation does not support this parameter, a return code of 'Use Of Timeout Parameter Not Supported' shall be returned.Descriptione) (Q UIDen code indicates an error condition.ValueMap),/258;>BHNTZg0123456..40964097409840994100..3276732768..65535Values&.AIXCompleted with No ErrorNot SupportedUnknown or Unspecified ErrorCannot complete within Timeout PeriodFailedInvalid ParameterIn UseDMTF ReservedMethod Parameters Checked - Job StartedInvalid State TransitionUse of Timeout Parameter Not SupportedBusyMethod ReservedVendor SpecificSetPowerStateAV4722ROOT\HPQ q  *U__PARAMETERSabstractPowerStateuint32 6IN 6] The Desired state for the COmputerSystem.Description) 6] !$'*-0312345678ValueMap6 6] 6 Full PowerPower Save - Low Power ModePower Save - StandbyPower Save - OtherPower CyclePower OffHibernateSoft OffValuesC 6] 6 ( IDP ] 6 ( uint32eTimedatetimee INe , Time indicates when the power state should be set, either as a regular date-time value or as an interval value (where the interval begins when the method invocation is received.Descriptione) , ZIDe6 , ZQdatetime __nAV4722ROOT\HPQ & *k__PARAMETERSabstractReturnValueuint32 ^uint32out ^f __:"GDescriptionSets the power state of the computer. The use of this method has been deprecated. Instead, use the SetPowerState method in the associated PowerManagementService class.SendTestIndicationSAV4722ROOT\HPQ  *^__PARAMETERSabstractTestIndicationIDuint32 <IN <c Internal identifier of the test event to generate 101 - Informational Test Event 102 - Warning Test Event 103 - Critical Test EventDescription) <c ID6 c Zuint32 __nAV4722ROOT\HPQ & *k__PARAMETERSabstractReturnValueuint32 ^uint32out ^f __+!"G# Q#x# #DescriptionMethod to cause the provider to send a test indication. Returns 0 if the request to send the indication was successful. Returns 1 if method not supported. Returns 2 if request to send indication failed. Returns 3 if busy processing previously requested indication. Returns 4 if the TestIndicationID is NULL or not valid.ValueMapi#l#o#r#u#01234Values#####OKNot SupportedFailedBusyInvalid Parameter$HP_ComputerSystemCIM_ComputerSystemCIM_System CIM_EnabledLogicalElementCIM_LogicalElementCIM_ManagedSystemElementCIM_ManagedElement6# Slu+|+@B U CS!!%%'&'--445546H66677W>a>>>@@AAAAYCjCP#P%]A]]^_'_a/accdeeeffbjrjttvvLycy)z=z{{{{N|\|||+B  2HP_WinComputerSystemDescriptionHewlett Packard Windows based Computer System.HPWinComputerSystemProvversion1.0.0AvailableRequestedStates`<8 #"" " uint16DescriptionAvailableRequestedStates indicates the possible values for the RequestedState parameter of the method RequestStateChange, used to initiate a state change. The values listed shall be a subset of the values contained in the RequestedStatesSupported property of the associated instance of CIM_EnabledLogicalElementCapabilities where the values selected are a function of the current state of the CIM_EnabledLogicalElement. This property may be non-null if an implementation is able to advertise the set of possible values as a function of the current state. This property shall be null if an implementation is unable to determine the set of possible values as a function of the current state.ValueMap 23467891011..Values /8BMV\clt{EnabledDisabledShut DownOfflineTestDeferQuiesceRebootResetDMTF ReservedCaption@ #"stringDescriptionThe Caption property is a short textual description (one- line string) of the object.CommunicationStatus@ &8 #"i " s " uint16DescriptionCommunicationStatus indicates the ability of the instrumentation to communicate with the underlying ManagedElement. CommunicationStatus consists of one of the following values: Unknown, None, Communication OK, Lost Communication, or No Contact. A Null return indicates the implementation (provider) does not implement this property. "Unknown" indicates the implementation is in general capable of returning this property, but is unable to do so at this time. "Not Available" indicates that the implementation (provider) is capable of returning a value for this property, but not ever for thi